Operating manual - Unisab III 005650-en 2010.10. 5/42 Operating Unisab III control. 1: Default picture. As Unisab III has been programmed with values for alarm limits, shutdown limits, set points, etc., the compressor can be started immediately. However, some of the values must be adapted to the actual operating situation. The manual offers a description of the Unisab III control system includingfunction, application and service.
News
Integrated systems controller for refrigeration compressors, chillers and heat pumps.
Sabroe Unisab III systems controllers are connectivity hubs that help make sure refrigeration installations have the best possible performance, maximum uptime and lowest possible operating costs.
Unisab 3 User Manual
These important control units are pre-equipped and pre-configured with the connectivity equipment and protocols necessary for monitoring and controlling a wide range of compressors, compressor packages, chillers and heat pumps – as well as using this data for fault-finding and analysis.You can find detailed information on our website:coolref.ru/EN
- Functionality
- Connectivity
- Specifications
- Advantages
- Retrofit
- Service on demand schedule
- Unisab app for smartphone
- Configurable for both screw compressors and reciprocating compressors, with or without variable-speed drive (VSD), and using any refrigerant
- Built-in regulation of suction pressure, water temperature, discharge pressure, etc.
- Limitations on suction pressure, discharge pressure, motor current, etc.
- Logging of operating history and profiles for effective fault-finding and diagnosis
- Email dispatch in case of alarm or shut down.
The Unisab III systems controller has normal industry-standard communication ports fitted as standard, and therefore does not require additional communication gateways.
Data can then be made available via any kind of network, where virtually any computer can be used to monitor and operate the Unisab III systems controller.
| Connectivity | Multiple communication ports, including Modbus TCP, Profibus DP and Sequence Bus, as standard |
| Smartphone app | Available for both iOS and Android devices |
| Sequencing | As many as 14 refrigeration compressors, chillers and heat pumps of different makes and types can be linked in sequence, to ensure effective load sharing and capacity optimisation |
| Diagnostics | Detailed operating data documenting 30 shut-down situations |
| Refrigerants | Pre-loaded with the requisite data about all refrigerants normally used |
| Operating languages | Multiple languages available as standard, with additional languages as options |
| Enclosure | IP54 |
| Ambient temperature | 0–55 °C |
| Power supply | 85–250 volt AC, 50–60 Hz |
| Dimensions (H x W x D) | 380 x 300 x 210 mm |
| Weight | 6,5 kg |
| Advantages | Benefits |
| Single, fully integrated control system for use with virtually all types of compressors and chillers | Ensures more effective monitoring, control and diagnostics of a wide range of key refrigeration installations |
| Easy to integrate into the vast majority of industrial control systems, providing seamless transfer of data between systems | Ensures effective management of important operating data and secures the production process for best performance |
| Monitoring, control and diagnostics capabilities combined in one compact, integrated unit | Does away with the need for multiple systems, resulting in significant equipment savings |
| Compressor sequencing and load sharing are possible without additional equipment | Keeps power consumption to a minimum and reduces operating costs |
| Intuitive, easy-to-use interface, with a consistent “look and feel” | Requires fewer operator skills, resulting in lower training costs |
Unisab 3 Manual Craftsman
- Functionality
- Connectivity
- Specifications
- Advantages
- Retrofit
- Service on demand schedule
- Unisab app for smartphone
- Configurable for both screw compressors and reciprocating compressors, with or without variable-speed drive (VSD), and using any refrigerant
- Built-in regulation of suction pressure, water temperature, discharge pressure, etc.
- Limitations on suction pressure, discharge pressure, motor current, etc.
- Logging of operating history and profiles for effective fault-finding and diagnosis
- Email dispatch in case of alarm or shut down.
The Unisab III systems controller has normal industry-standard communication ports fitted as standard, and therefore does not require additional communication gateways.
Data can then be made available via any kind of network, where virtually any computer can be used to monitor and operate the Unisab III systems controller.
| Connectivity | Multiple communication ports, including Modbus TCP, Profibus DP and Sequence Bus, as standard |
| Smartphone app | Available for both iOS and Android devices |
| Sequencing | As many as 14 refrigeration compressors, chillers and heat pumps of different makes and types can be linked in sequence, to ensure effective load sharing and capacity optimisation |
| Diagnostics | Detailed operating data documenting 30 shut-down situations |
| Refrigerants | Pre-loaded with the requisite data about all refrigerants normally used |
| Operating languages | Multiple languages available as standard, with additional languages as options |
| Enclosure | IP54 |
| Ambient temperature | 0–55 °C |
| Power supply | 85–250 volt AC, 50–60 Hz |
| Dimensions (H x W x D) | 380 x 300 x 210 mm |
| Weight | 6,5 kg |
| Advantages | Benefits |
| Single, fully integrated control system for use with virtually all types of compressors and chillers | Ensures more effective monitoring, control and diagnostics of a wide range of key refrigeration installations |
| Easy to integrate into the vast majority of industrial control systems, providing seamless transfer of data between systems | Ensures effective management of important operating data and secures the production process for best performance |
| Monitoring, control and diagnostics capabilities combined in one compact, integrated unit | Does away with the need for multiple systems, resulting in significant equipment savings |
| Compressor sequencing and load sharing are possible without additional equipment | Keeps power consumption to a minimum and reduces operating costs |
| Intuitive, easy-to-use interface, with a consistent “look and feel” | Requires fewer operator skills, resulting in lower training costs |
Unisab 3 Manual Craftsman
Unisab Iii Modbus Manual
A wide range of Unisab III retrofit kits are available to provide all the advantages of upgrading a wide range of existing compressors to a modern controls standard for improved performance and control system integration.
